Specifications

Enterasys Wireless Controller Software CLI Reference Guide 4-41
4.3.1.11 show
Usetheshowcommandtodisplay802.11nAPinformation.Theshowcommandisaccessible
fromtheap:defaults:11ncontextoftheCLI.
Syntax
show
Parameters
None.
Examples
Thefollowingexampledisplays802.11nAPinfo rmation.
EWC.enterasys.com:ap:defaults:11n# show
telnet
poll_timeout 15
client_session
no persistent
no bcast_disassoc
country United States
led-mode normal
lbs-status enabled
4.3.2 4102
The4102commandreferstocontext4102,whichcontainscommandstoconfigurethedefaultAP
settingsfortheWirelessAP4102.The4102commandisaccessiblefromtheap:defaultscontextof
theCLI.
Thefollowingcommandsareavailableintheap
:defaults:4102context:
• bcast_disassoc
• client_session
• country
• led‐mode
• lldp
• persistent
• poll_timeout
• radio1—Seeradio1forcommandsintheap:defaults:4102:radio1context.
• radio2—Seeradio2forcommandsintheap:defaults:4102:radio2context.
• telnet
4.3.2.1 bcast_disassoc
Usethebcast_disassoccommandtoenabletheWirelessAPtousebroadcastdisassociationwhen
disconnectingallclients,insteadofdisassociatingeachclientonebyone.Usethenoformofthe