Specifications

4-40 ap Commands
Parameters
Examples
ThefollowingexamplesetstheprotectiontypetoCTS
EWC.enterasys.com:ap:defaults:11n:radio2# ptype cts only
4.3.1.10.29 rts
UsethertscommandtospecifythesizeoftheRequesttoSend(RTS)threshold.Thertscommand
isaccessiblefromtheap:defaults:11n:radio2contextoftheCLI.
Syntax
rts <value>
Parameters
Examples
ThefollowingexamplesetstheRTSpacket sizeto256
EWC.enterasys.com:ap:defaults:11n:radio2# rts 256
4.3.1.10.30 tx_max_power
Usethetx_max_powercommandtosetthemaximumTxpowerlevel.Thetx_max_power
commandisaccessiblefromtheap:defaults:11n:radio2contextoftheCLI.
Syntax
tx_max_power <value>
Parameters
Examples
ThefollowingexamplesetsthemaximumTxpowerlevelto18dBm.
EWC.enterasys.com:ap:defaults:11n:radio2# tx_max_power 18
ctsonly SpecifiestheCleartoSend(CTS)type.
rtscts SpecifiestheRequesttoSend(RTS)andCleartoSend(CTS)ypes
Note: The acceptable value for the rts value is 1 to 2346.
<value> SpecifiestheRequesttoSendpacketsizethreshold.
Note: The tx_max_power is a maximum level when ATPC is enabled, and a fixed level when it
ATPC is disabled.
<value> SpecifiesthemaximumTxpowerlevel.