Specifications

Enterasys Wireless Controller Software CLI Reference Guide 4-37
Parameters
Examples
Thefollowingexamplesetstheextensionchannelthresholdvalueto60percent.
EWC.enterasys.com:ap:defaults:11n:radio2# n_pbthreshold 60
4.3.1.10.22 n_pmode
Usethen_pmodecommandtoenabletheprotectionontheprimarychannel.Usetheno
commandtodisableprotection.Then_pmodecommandisaccessiblefromthe
ap:defaults:11n:radio2contextoftheCLI.
Syntax
n_pmode
no n_pmode
Parameters
None
Examples
Thefollowingexampleenablestheprotectionmode
EWC.enterasys.com:ap:defaults:11n:radio2# n_pmode
4.3.1.10.23 n_poffset
Usethen_poffsetcommandtosetthe40MHzProtectionChannelOffset.Then_poffsetcommand
isaccessiblefromtheap:defaults:11n:radio2contextoftheCLI.
Syntax
n_poffset 20|25
Parameters
Examples
Thefollowingexamplesetstheprotectionchanneloffsetto20MHz.
EWC.enterasys.com:ap:defaults:11n:radio2# n_poffset 20
<0‐100> Specifiestheextensionchannelthresholdvalueasapercentage.
20 Specifiesa20MHzchanneloffset
25 Specifiesa25MHzchanneloffset