Specifications

Enterasys Wireless Controller Software CLI Reference Guide 4-35
Examples
ThefollowingexampledisablestheaggregateMSDU.
EWC.enterasys.com:ap:defaults:11n:radio2# no n_aggr_msdu
4.3.1.10.17 n_aggr_msdu_max
Usethen_aggr_msdu_maxcommandtospecifythemaximumlengthofanA‐MSDU.The
n_aggr_msdu_maxcommandisaccessiblefromtheap:defaults:11n:radio2contextoftheCLI.
Syntax
n_aggr_msdu_max <2290-4096>
Parameters
Examples
ThefollowingexamplesetsthemaximumlengthoftheaggregateMSDUto3000bytes.
EWC.enterasys.com:ap:defaults:11n:radio2# n_aggr_msdu_max 3000
4.3.1.10.18 n_chlbonding
Usethen_chlbondingcommandtospecifythechannelbondingtype—upordown.The
n_chlbondingcommandisaccessiblefromtheap:defaults:11n:radio2contextoftheCLI.
Syntax
n_chlbonding (up|down)
Parameters
Examples
Thefollowingexamplesetsthechannelbondingtypeasup.
EWC.enterasys.com:ap:defaults:11n:radio2# n_chlbonding up
<2290‐4096> ThemaximumsizeofbytesofaA‐MSDU.Therangeofvalues
allowedis2290to4096.
up Theprimarychannel(20MHz)isbondedwithanextension
channelthatis20MHzabove(bondingup)theprimarychannel.
down Theprimarychannel(20MHz)isbondedwithanextension
channelthatis20MHzbelow(bondingdown)theprimary
channel.
Note: Depending on the channel you have selected, you may be prevented from bonding up or
down. For more information, see the Enterasys Wireless Controller, Access Points and
Convergence Software User Guide.