Specifications

4-30 ap Commands
11: 2462 MHz
4.3.1.10.6 domain
UsethedomaincommandtoidentifyagroupofAPsthatcooperateinmanagingRFchannelsand
transmissionpowerlevels.Thedomaincommandisaccessiblefromtheap:defaults:11n:radio2
contextoftheCLI.
Syntax
domain <domain_name>
Parameters
Examples
ThefollowingexampleassignsthenametesttothegroupofAPsthatcooperateinmanagingRF
channelsandtransmissionpowerlevels.
EWC.enterasys.com:ap:defaults:11n:radio2# domain test
4.3.1.10.7 dtim
UsethedtimcommandtosettheDeliveryTrafficIndicationMessage(DTIM)period.Thedtim
commandisaccessiblefromtheap:defaults:11n:radio2contextoftheCLI.
Syntax
dtim <value>
Parameters
Examples
ThefollowingexamplesetstheDeliveryTrafficIndicationMessageperiodto2beacons.
EWC.enterasys.com:ap:defaults:11n:radio2# dtim 2
4.3.1.10.8 frag
Usethefragcommandtosetthefragmentationthreshold,whichisthemaximumsizeofapacket
ordataunitthatcanbedelivered.Anydataabovethisthresholdwillbefragmentedintopackets
Note: The maximum length of the domain string is 15 characters.
<domain_name> SpecifiesthegroupnameofAPsthatcooperatein
managingRFchannels.
Note: The acceptable range for the dtim value is from 1 to 255 beacon intervals.
<value> SpecifiestheDTIMperiodinbeacons