Specifications

Enterasys Wireless Controller Software CLI Reference Guide 4-27
Examples
ThefollowingexampledepictsRadio2oftheWireless802.11nAPconfiguredtousetheleft‐middle‐
rightantennacombination.
EWC.enterasys.com:ap:defaults:11n:radio2# antsel left-middle-right
4.3.1.10.3 atpc
UsetheatpccommandtoenableAutoTxPowerCtrl(ATPC).Usethenoformofthecommandto
disabletheATPCfeature.Theatpccommandisaccessiblefromtheap:defaults:11n:radio2context
oftheCLI.
Syntax
atpc
no atpc [maintain_power]
Parameters
Examples
ThefollowingexampledisablesatpconRadio1.
EWC.enterasys.com:ap:defaults:11n:radio2# no atpc maintain_power
4.3.1.10.4 beaconp
Usethebeaconpcommandtosettimeunitsbetweenbeacontransmissions.Thebeaconp
commandisaccessiblefromtheap:defaults:11n:radio2contextoftheCLI.
Syntax
beaconp <value>
middle SpecifiestheuseofthemiddleantennaontheWireless
802.11nAP.
right SpecifiestheuseoftherightantennaontheWireless
802.11nAP.
left‐middle Specifiestheuseoftheleft‐middleantennacombinationon
theWireless802.11nAP.
left‐right Specifiestheuseofthe left‐rightantennacombinationon
theWireless
802.11nAP.
middle‐right Specifiestheuseofthemiddle‐rightantennacombination
ontheWireless802.11nAP.
left‐middle‐right Specifiestheuseoftheleft‐middle‐rightantenna
combinationontheWireless802.11nAP.
[maintain_power] WhenyoudisableATPC,youcan electtomaintainusingthe
currentTxpowersettingATPChadestablished.