Specifications

Enterasys Wireless Controller Software CLI Reference Guide 4-25
Examples
ThefollowingexamplesetsthemaximumTxpowerlevelto18dBm.
EWC.enterasys.com:ap:defaults:11n:radio1# tx_max_power 18
4.3.1.9.28 tx_min_power
Usethetx_min_powercommandtospecifytheminimumTxpowerlevel.Thetx_min_power 
commandisaccessiblefromtheap:defaults:11n:radio1contextoftheCLI.
Syntax
tx_min_power <value>
Parameters
Examples
Thefollowingexamplespecifies theminimumTxpowerlevelto8dBm.
EWC.enterasys.com:ap:defaults:11n:radio1# tx_min_power 8
4.3.1.10 radio2
Theradio2commandreferstotheradio2context,whichcontainscommandstoconfigureRadio2
oftheWirelessAP.Theradio2commandisaccessiblefromtheap
:defaults:11ncontextoftheCLI.
Thefollowingcommandsareavailableintheap
:defaults:11n:radio2context:
• admin‐mode
• antsel
• atpc
• beaconp
• dcs—Seedcsforcommandsintheap:defaults:11n:radio2:dcscontext.
• domain
• dtim
• frag
• max‐distance
• minbrate
• mode
• n_addba_support
• n_aggr_mpdu
• n_aggr_mpdu_max
• n_aggr_mpdu_max_subframes
Note: The tx_min_power is available only when Auto Tx Power Ctrl (ATPC) is enabled.
<value> SpecifiesthevalueindBm