Specifications

4-24 ap Commands
Parameters
Examples
ThefollowingexamplesetstheRTSpacket sizeto256
EWC.enterasys.com:ap:defaults:11n:radio1# rts 256
4.3.1.9.26 tx_adjust_power
Usethetx_adjust_powercommandtospecifyanoffsettotheTxpowerlevel,whichisusedto
adjusttheATPCpowerlevelsfromthecalculatedvalue.Thetx_adjust_powercommandis
accessiblefromtheap:defaults:11n:radio1 contextoftheCLI.
Syntax
tx_adjust_power <value>
Parameters
Examples
Thefollowingexamplespecifies theTxpowerlevelto0dBm.
EWC.enterasys.com:ap:defaults:11n:radio1# tx_adjust_power 0
4.3.1.9.27 tx_max_power
Usethetx_max_powercommandtosetthemaximumTxpowerlevel.Thetx_max_power
commandisaccessiblefromtheap:defaults:11n:radio1contextoftheCLI.
Syntax
tx_max_power <value>
Parameters
Note: The acceptable value for the rts value is 1 to 2346.
<value> SpecifiestheRequesttoSendpacketsizethreshold.
Note: The tx_adjust_power command is available only when Auto Tx Power Ctrl (ATPC) is
enabled.
<value> SpecifiesthevalueindBm
Note: The tx_max_power is a maximum level when ATPC is enabled, and a fixed level when it
ATPC is disabled.
<value> SpecifiesthemaximumTxpowerlevel.