Specifications

Enterasys Wireless Controller Software CLI Reference Guide 4-23
Examples
Thefollowingexampleenablestheprotectionmode
EWC.enterasys.com:ap:defaults:11n:radio1# n_pmode
4.3.1.9.23 n_poffset
Usethen_poffsetcommandtosetthe40MHzProtectionChannelOffset.Then_poffsetcommand
isaccessiblefromtheap:defaults:11n:radio1contextoftheCLI.
Syntax
n_poffset 20|25
Parameters
Examples
Thefollowingexamplesetstheprotectionchanneloffsetto20MHz.
EWC.enterasys.com:ap:defaults:11n:radio1# n_poffset 20
4.3.1.9.24 n_ptype
Usethen_ptypecommandtospecifythe40MHzprotectiontype—whetherCTS,RTSornone.
Then_ptypecommandisaccessiblefromtheap:defaults:11n:radio1contextoftheCLI.
Syntax
n_ptype {none|cts only|rts cts}
Parameters
Examples
Thefollowingexamplesetsthecleartosend(CTS)protectiontype.
EWC.enterasys.com:ap:defaults:11n:radio1# n_ptype cts only
4.3.1.9.25 rts
UsethertscommandtospecifythesizeoftheRequesttoSend(RTS)threshold.Thertscommand
isaccessiblefromtheap:defaults:11n:radio1contextoftheCLI.
Syntax
rts <value>
20 Specifiesa20MHzchanneloffset
25 Specifiesa25MHzchanneloffset
none No40MHzprotectiontypeisenabled.
ctsonly SpecifiesCleartoSend(CTS)protectiontype.
rtscts SpecifiesReceivetoSend(RTS)/CleartoSend(CTS)protection
type.