Specifications

4-22 ap Commands
4.3.1.9.20 n_guardinterval
Usethen_guardintervalcommandtospecifytheguardinterval—shortorlong.The
n_guardintervalcommandisaccessiblefromtheap:defaults:11n:radio1contextoftheCLI.
Syntax
n_guardinterval short|long
Parameters
Examples
Thefollowingexamplesetsthelongguardinterval.
EWC.enterasys.com:ap:defaults:11n:radio1# n_guardinterval long
4.3.1.9.21 n_pbthreshold
Usethen_pbthresholdcommandtospecifytheextensionchannelthreshold.Thisvalueisusedto
determinewhichchannelwidthtousewhenthen_chlwidthissettoauto.Then_pbthreshold
commandisaccessiblefromtheap:defaults:11n:radio1contextoftheCLI.
Syntax
n_pbthreshold <0-100>
Parameters
Examples
Thefollowingexamplesetstheextensionchannelthresholdvalueto60percent.
EWC.enterasys.com:ap:defaults:11n:radio1# n_pbthreshold 60
4.3.1.9.22 n_pmode
Usethen_pmodecommandtoenabletheprotectionontheprimarychannel.Usetheno
commandtodisableprotection.Then_pmodecommandisaccessiblefromthe
ap:defaults:11n:radio1contextoftheCLI.
Syntax
n_pmode
no n_pmode
Parameters
None
short Specifiesashortguardinterval
long Specifiesashortguardinterval
<0‐100> Specifiestheextensionchannelthresholdvalueasapercentage.