Specifications

4-18 ap Commands
Usage
Theminimumbasicratemustbelowerthanorequattotheconfiguredmaximumbasicdatarate
andmaximumdatarate thatclientscanoperateatwhileassociatedwiththeAP.
Examples
Thisexamplesetsthemodeforradio1toa,thensetstheminimumbasicdatarateto12Mbps.
EWC.enterasys.com:ap:defaults:11n:radio1# mode a
EWC.enterasys.com:ap:defaults:11n:radio1# minbrate 12
4.3.1.9.11 mode
UsethemodecommandtosettheradiooptionsforRadio1.Usethenoformofthecommandto
disableRadio1.Themodecommandisaccessiblefromtheap:defaults:11n:radio1contextofthe
CLI.
Syntax
mode a|an|n-strict
Parameters
Examples
EWC.enterasys.com:ap:defaults:11n:radio1# mode a
4.3.1.9.12 n_addba_support
Usethen_addba_supportcommandtoenabletheADDBAsupport.Usethenocommandto
disablethefeature.Then_addba_supportcommandisaccessiblefromtheap:defaults:11n:radio1
contextoftheCLI.
Syntax
n_addba_support
no n_addba_support
Radio Mode Minimum Basic Rate Range per Mode
a 6, 12, 24
an 6, 12, 24
n-strict 6, 12, 24, MCS0 – MCS7
Note: Depending on the radio mode you select, some of the radio settings may not be available for
configuration.
aEnableonly802.11amodeofRadio1.
an Enableboththe802.11amodeandthe802.11nmodeof
Radio1.
n‐strict Enablethe802.11amodeofRadio1with802.11nstrict
capability.