Specifications

4-16 ap Commands
Parameters
Examples
ThefollowingexampleassignsthenametesttothegroupofAPsthatcooperateinmanagingRF
channelsandtransmissionpowerlevels.
EWC.enterasys.com:ap:defaults:11n:radio1# domain test
4.3.1.9.7 dtim
UsethedtimcommandtosettheDeliveryTrafficIndicationMessage(DTIM)period.Thedtim
commandisaccessiblefromtheap:defaults:11n:radio1contextoftheCLI.
Syntax
dtim <value>
Parameters
Examples
ThefollowingexamplesetstheDeliveryTrafficIndicationMessageperiodto2beacons.
EWC.enterasys.com:ap:defaults:11n:radio1# dtim 2
4.3.1.9.8 frag
Usethefragcommandtosetthefragmentationthreshold,whichisthemaximumsizeofapacket
ordataunitthatcanbedelivered.Anydataabovethisthresholdwillbefragmentedintopackets
thatarelessthanorequaltothislimit.Thefragcommandisaccessiblefromthe
ap:defaults:11n:radio1
contextoftheCLI.
Syntax
frag <value>
Note: The maximum length of the domain string is 16 characters.
<domain_name> SpecifiesthegroupnameofAPsthatcooperatein
managingRFchannels.
Note: The acceptable range for the dtim value is from 1 to 255 beacon intervals.
<value> SpecifiestheDTIMperiodinbeacons