Specifications

Enterasys Wireless Controller Software CLI Reference Guide 4-15
108: 5540 MHz
112: 5560 MHz
116: 5580 MHz
120: 5600 MHz
124: 5620 MHz
128: 5640 MHz
132: 5660 MHz
136: 5680 MHz
140: 5700 MHz
149: 5745 MHz
153: 5765 MHz
157: 5785 MHz
161: 5805 MHz
165: 5825 MHz
4.3.1.9.5.6 update_period
Usetheupdate_periodcommandtosettheDCSupdateperiod,duringwhichtheWirelessAP
averagestheDCSnoisethresholdandDCSchanneloccupancythresholdmeasurements.Ifeither
oneofthesethresholdsisexceeded,theWirelessAPwilltriggerACS.Theupdate_period
commandisaccessiblefromtheap:defaults:11n:radio1:dcscontextofthe
CLI.
Syntax
update_period <period>
Parameters
Examples
ThefollowingexamplesetstheDCSupdateperiodto2minutes.
EWC.enterasys.com:ap:defaults:11n:
1:dcs# update_period 2
4.3.1.9.6 domain
UsethedomaincommandtoidentifyagroupofAPsthatcooperateinmanagingRFchannelsand
transmissionpowerlevels.Thedomaincommandisaccessiblefromtheap:defaults:11n:radio1
contextoftheCLI.
Syntax
domain <domain_name>
<period> Specifiesthetimeperiod,measuredinminutes,during
whichtheWirelessAPaveragestheDCSnoisethreshold
andDCSchanneloccupancythresholdmeasurements.If
eitheroneofthesethresholdsisexceeded,thentheWireless
APwilltriggerACS
Rangeis1to15minutes.