Specifications

4-6 ap Commands
4.3.1.2 client_session
Usetheclient_sessioncommandtoenableuserstomaintainclientsessionsintheeventofapoll
failure.Usethenoformofthecommandtodisablethefeature.Theclient_sessioncommandis
accessiblefromtheap
:defaults:11ncontextoftheCLI.
Syntax
client_session
no client_session
Parameters
None
Examples
Thefollowingexampleenablesuserclientsessions
EWC.enterasys.com:ap:defaults:11n# client_session
4.3.1.3 country
UsethecountrycommandtospecifythecountrytheWirelessAPresidesin.Thecountry
commandisaccessiblefromtheap
:defaults:11ncontextoftheCLI.
Syntax
country <country_name>
Parameters
Examples
ThefollowingexamplesetsthenameofthecountrytoUnitedStates.
EWC.enterasys.com:ap:defaults:11n# country United States
Note: After you have run the bcast_disassoc command, you must run the apply command to
implement the change in broadcast disassociation.
Note: After you have run the client_session command, you must run the apply command to
implement the change in client session.
Note: This option is not available for controllers using a single-country license, such as Japan,
Thailand, or Israel.
<country_name> Specifiesthenameofthecountry
Note: After you have run the country command, you must run the apply command to implement
the change in country.