Specifications

Enterasys Wireless Controller Software CLI Reference Guide 4-5
Thefollowingcommandsareavailableintheap:defaultscontext:
• 11n—See11nforcommandsintheap:defaults:11ncontext.
• 4102—See4102forcommandsinthea p:defaults:4102context.
• assign—Seeassignforcommandsintheap:defaults:assigncontext.
• dualband—Seedualband forcommandsinthe ap:defaults:dualbandcontext.
• learnac
• std—Seestdforcommandsinthe
ap:defaults:stdcontext.
4.3.1 11n
The11ncommandreferstocontext11n,whichcontainscommandstoconfigurethedefaultAP
settingsfortheWireless802.11nAP(AP3610/AP3620).The11ncommandisaccessiblefromthe
ap:defaultscontextoftheCLI.
Thefollowingcommandsareavailableintheap
:defaults:11ncontext:
• bcast_disassoc
• client_session
• country
• lbs‐status
• led‐mode
• lldp
• persistent
• poll_timeout
• radio1—Seeradio1forcommandsintheap:defaults:11n:radio1context.
• radio2—Seeradio2forcommandsintheap:defaults:11n:radio2context.
• show
4.3.1.1 bcast_disassoc
Usethebcast_disassoccommandtoenabletheWirelessAPtousebroadcastdisassociationwhen
disconnectingallclients,insteadofdisassociatingeachclientonebyone.Usethenoformofthe
commandtodisablethefeature.Thebcast_disassoccommandisaccessiblefromthe
ap
:defaults:11ncontextoftheCLI.
Syntax
bcast_disassoc
no bcast_disassoc
Parameters
None
Examples
ThefollowingdisassociatesclientsfromtheWirelessAP
EWC.enterasys.com:ap:defaults:11n# bcast_disassoc