Specifications

Enterasys Wireless Controller Software CLI Reference Guide 4-1
4
ap Commands
ThissectiondescribescommandsrequiredtomanagethebasicfunctionsoftheWirelessAPson
thesystem.ThesecommandsarefoundintheapcontextoftheCLI.
Thefollowingcommandsareavailableintheapcontext:
• access
• blacklist—Seeblacklistforcommandsintheap:blacklistcontext.
• defaults—
Seedefaultsforcommandsintheap:defaultscontext.
• export_drm
• import_drm
• load‐groups—Seeload‐groupsforcommandsintheap:load‐groupscontext.
• maintenance—Seemaintenanceforcommandsintheap:maintenancecontext.
• registration—Seeregistrationforcommandsintheap:registrationcontext.
• remove
• search
• serial
• <serial>—See<serial>for
commandsintheap:<serial>context.
4.1 access
UsetheaccesscommandtomodifytheregistrationstatusofWirelessAPsonthesystem.The
accesscommandisaccessiblefromtheapcontextoftheCLI.
Syntax
access <ap_serial> <release|pending|approved|reboot|standalone|
(sensor [force])>
Parameters
Note: All CLI commands cache changes. For this reason, sometimes when you make a change in a
particular context, the change may not be visible immediately. If this happens, you must exit and re-
enter the context in order to ensure that the database is synchronized with the latest change.
<ap_serial> TheserialnumberoftheWirelessAP