User`s guide

Release Notes Upgrading to Aurorean Release 3.5
Release 3.5 Enhanced Support for VPN Clients
Rel. 3.5 Release Notes Page 13 of 30
To issue the ipsecDefault command, perform the following:
1. Log into the ANG-3000/7000 with the login and password netadmin (default)
and press
ENTER.
2. At the command prompt, change directory to usr/indus/ipsec.
3. Type ipsecDefault and press
ENTER.
4. Reboot the ANG-3000/7000.
Configuring L2TP and EAP
To configure L2TP and EAP protocols using the RiverMaster management program,
refer to the RiverMaster Administrator’s Guide.
Configuring the Microsoft RADIUS Plugin
To configure Microsoft RADIUS authentication, set the parameters as you would set
any authentication plugin parameter in RiverMaster (refer to Figure 10) including the
Server Address, Shared Secret, Authentication and Accounting Port number, Timeout,
Retry, IR Group Attribute, and Hash values.
NOTE
The IR Group Attrib field requires the Microsoft IAS RADIUS number.
CAUTION
You must checkmark the Default Plugin box.
For more detailed information, refer to the RiverMaster Administrator’s Guide.