User`s guide

44 XSR User’s Guide
Network Management Tools Chapter 2
Managing the XSR
Software Image Download
The NetSight Remote Administrator application can download an image to
the XSR using TFTP. The software image download is initiated through
NetSight using an SNMP
set command, which triggers a TFTP download
session initiated from the XSR.
NOTE
The XSR does not support an off-line download triggered by SNMP. That is,
when you use NetSight to download an image, a dialog box will pop up
with a check box titled Online download. If the box is unchecked, the SNMP
request will fail. See NetSight documentation for more information.
Using SNMP Download with Auto-Reboot Option
To use this option, you must first enter the following command in Global
mode to allow a user to reboot the XSR using SNMP:
XSR(config)#snmp-server system-shutdown
When a user employs NetSight to download an image, a dialog box will pop
up with a check box titled Auto reboot. If the box is checked, the XSR will be
rebooted remotely after the download ends. If the
snmp-server system-
shutdown
command were not entered and the remote user chose the auto
reboot option, the request would fail.