User`s guide

40 XSR User’s Guide
Network Management through SNMP Chapter 2
Managing the XSR
Network Management through SNMP
XSR system monitoring provides for the SNMP v1 agent (READ-ONLY)
including gets and limited sets and SNMP v3 gets and sets. Standard MIB II
modules are supported as well as Enterasys MIBs, as listed in the following
table. Proprietary MIBs are available via download at:
http://www.enterasys.com/support/mibs
In order to use SNMP to gather statistics or configure the device, first
configure the XSR’s SNMP agent with the
snmp-server commands.
Table 5 XSR Standard and Proprietary MIBs
MIB Module Document Comments
MIB-II RFC-1212 The egpNeighTable and atTable MIBs are not supported.
Query ipNetToMediaTable for address translation data.
Evolution of the Interface
Group of MIB-II
RFC-1573 Translated to SMIv1. Supports ifStackTable only.
Upload/Download Enterasys Proprietary MIB: CTRON-DOWNLOAD-MIB
Chassis Enterasys Proprietary MIB: CHASSIS-MIB partially supported.
Entity RFC-2737 Translated to SMIv1. EntPhysicalTable is supported only.
Tunnel RFC-2667 The tunnelIf Table is supported when VPN is enabled.
SNMPv3 MIB: Framework RFC-3411 Standard MIB
SNMPv3 MIB: MPD RFC-3412 Standard MIB
SNMPv3 MIB: USM RFC-3414 Standard MIB
SNMPv3 MIB: VACM RFC-3415 Standard MIB
Timed-Reset Enterasys Proprietary MIB
Configuration Change Enterasys Proprietary MIB
Configuration Management Enterasys Proprietary MIB
Syslog Client Enterasys Proprietary MIB
SNMP Persistence Enterasys Proprietary MIB