User`s guide

374 XSR User’s Guide
Alarms and Events Appendix A
Alarms/Events and System Limits
T1E1 Receive AIS cleared. Indicates that T1/E1 physical port is not detecting AIS Alarm.
T1 Cablelength long failed for slot/card/port. Configuration command sent to driver returned an error.
T1 Cablelength short failed for slot/card/port. Configuration command sent to driver returned an error.
T1 Bert start failed for slot/card/port. Configuration command sent to driver returned an error.
T1 Bert profile failed for slot/card/port. Configuration command sent to driver returned an error.
T1 Bert abort failed for slot/card/port. Configuration command sent to driver returned an error.
T1 Clear controller counter failed for
slot/card/port.
Configuration command sent to driver returned an error.
T1 Load channel failed for slot/card/port:channel. Load command sent to driver returned an error.
T1 Unload channel failed for
slot/card/port:channel.
Unload command sent to driver returned an error.
T1 Start channel failed for slot/card/port:channel. Start command sent to driver returned an error.
T1 Delete channel interface failed for
slot/card/port:channel.
Interface object delete could not be executed.
T1 Create channel interface failed for
slot/card/port:channel.
Interface object create could not be executed.
T1 Clock source failed for slot/card/port. Configuration command sent to driver returned an error.
T1 CRC failed for slot/card/port:channel. Configuration command sent to driver returned an error.
T1 FDL failed for slot/card/port. Configuration command sent to driver returned an error.
T1 Framing failed for slot/card/port. Configuration command sent to driver returned an error.
T1 Invert data failed for slot/card/port:channel. Configuration command sent to driver returned an error.
T1 Linecode failed for slot/card/port. Configuration command sent to driver returned an error.
T1 Loopback configuration failed for
slot/card/port.
Loopback command sent to driver returned an error.
T1 Loopback stop failed for slot/card/port. Loopback stop command sent to driver returned an error.
T1 Load controller failed for slot/card/port. Load command sent to driver returned an error.
T1 Unload controller failed for slot/card/port. Unload command sent to driver returned an error.
T1 Start controller failed for slot/card/port. Start command sent to driver returned an error.
Table 18 Low Severity Alarms/Events (Continued)
Module Message Description