User`s guide

XSR User’s Guide 373
Appendix A Alarms and Events
Alarms/Events and System Limits
Refer to the table below for all Low severity alarms and events reported by
the XSR. All of the following messages are USER_LEVEL facility except for
those in bold text which are SECURITY_LEVEL.
DIAL No dial tone for modem on intf # Indicates that there is no dial tone for the modem PSTN line
DIAL No carrier for modem on intf # Indicates that the remote modem is not present at the location called by
the local modem
DIAL No answer for modem on intf # Indicates that the remote modem is not configured for autoanswering.
DIAL Connection dropped for modem on
intf#s
Indicates that the phone line connection is disconnected by the PSTN.
DIAL Hangup fail for modem on intf # Indicates the failure of the disconnect from the phone line command to
the modem.
DIAL Connection closed for modem on intf # Indicates that the phone line disconnect command is successful.
DIAL Dialup connection opened for modem
on intf #
Indicates that the modem has successfully established a phone line
connection with the remote site.
CLI Failed to create session for Telnet
access
Telnet session could not be created at this time
CLI Unrecognized parameter <parameter
string> at line <line #> in <file>
Invalid parameters from initialization configuration file during boot
process. This file is different from the startup.cfg
Table 17 Medium Severity Alarms/Events (Continued)
Module Message Description
Table 18 Low Severity Alarms/Events
Module Message Description
T1E1 Receiver has Loss of Signal (Red Alarm). Indicates that T1/E1 physical port is detecting LOS Alarm.
T1E1 LOS alarm on receiver cleared. Indicates that T1/E1 physical port is not detecting LOS Alarm.
T1E1 Receive Remote Alarm Indication (Yellow
Alarm).
Indicates that T1/E1 physical port is detecting RAI Alarm.
T1E1 Receive RAI alarm cleared. Indicates that T1/E1 physical port is not detecting RAI Alarm.
T1E1 Receive Alarm Indication Signal (Blue Alarm). Indicates that T1/E1 physical port is detecting AIS Alarm.