User`s guide

368 XSR User’s Guide
Alarms and Events Appendix A
Alarms/Events and System Limits
Refer to the table below for all Medium severity alarms and events reported
by the XSR. All of the following messages are USER_LEVEL facility except for
those in bold text which are SECURITY_LEVEL.
CLI CLI config mode released by user
<username>
Occurs when a user (unknown) exits the configuration mode
CLI CLI Config mode locked by user
<username>
Occurs when another user is in Configuration mode and you trying to
get to configuration mode
CLI CLI Config mode locked by startup-
config
Configuration mode is locked when the startup-config script finishes
execution
CLI CLI Config mode released by user
<username>
Occurs when a user exits Configuration mode
CLI Cannot delete the Admin Occurs when you try to delete the administrator account
ASYNC_
DRIV
The ISR could not be connected The driver failed to connect the ISR to the BSP, therefore it will not be
started
ASYNC_
DRIV
Init string parse failure The driver could not parse the initialization string and therefore it will
not be started.
ASYNC_
DRIV
Unrecoverable error The device has an un-recoverable error
ASYNC_
DRIV
OS initialization failure The operating system failed to initialize the driver properly, therefore
the device cannot be started
ASYNC_
DRIV
Device not found The device could not be found on the PCI bus, so the driver cannot be
started
Table 16 High Severity Alarms/Events (Continued)
Module Message Description
Table 17 Medium Severity Alarms/Events
Module Message Description
T1E1 Not enough memory (Device: card
number).
Error in allocating memory for T1E1 HW card.
T1E1 PCI device failure (Device: card
number).
Error in initializing T1E1 HW card.