User`s guide

364 XSR User’s Guide
Alarms and Events Appendix A
Alarms/Events and System Limits
ISDN %s Layer 2 Terminal %d is DOWN
%s Layer 2 Terminal %d is UP
Q921 - LAP-D status, UP is normal operation. Terminal is 1 for PRI.
For BRI it may be 1 or 2. 1 for ETSI and NTT. For North America 1
and 2 if two SPIDs are configured.
ISDN %s Outgoing Call to %s %s Timed Out For basic-NET3 BRI, XSR-1805 was not able to activate the BRI line
for an outgoing call
ISDN %s Switch Offers call for BUSY channel
%X
Error condition!
ISDN Incoming Call <BRI | Serial
card/port:channel> Connected to
<calling no.> Unknown Call
Incoming Call connected for test purposes and will be disconnected
within 30 seconds.
ISDN North American BRI Interface %d
requires SPID configuration
Configuration error.
ISDN Call <BRI | Serial card/port:channel>
Connected to <called_no.> Outgoing
test CALL
Test Call placed from the console.
ISDN Call <BRI | Serial card/port:channel>
Disconnected from <number>
<Outgoing test CALL | Unknown Call>
Cause <passed from central office>
Test call disconnected due to standard ISDN cause. E.g. 16: normal
clearing, 18: user does not answer.
ISDN No Channel Available <destination
name>
ISDN line was over subscribed.
ISDN _FILE _LINE Out of memory Unable to allocate memory
ISDN ISDN panic!! Unable to create ISDN object
ISDN _FILE _LINE Out of memory Unable to allocate memory
ISDN _FILE _LINE Out of memory Unable to allocate memory
ISDN _FILE _LINE unexpected value Unexpected message received
ISDN Interface BRI, changed state to up Port has changed to UP state
ISDN Interface BRI, changed state to down Port has changed to DOWN state
Frame Relay Serial a/b:d.e, started Output from the no shutdown command
Frame Relay Serial a/b:d.e, shutting down The interface has been manually shut down
Frame Relay Serial a/b:d.e, station UP, DLCI nnnn The network reports station up.
Table 16 High Severity Alarms/Events (Continued)
Module Message Description