User`s guide

182 XSR User’s Guide
Backup Configuration Chapter 8
Configuring Dialer Services
The following commands add a dialer pool, set Node C’s dialer number to
call, specify a clear text password sent to the peer for PAP authentication, and
map BRI interface 1/0 to Dialer interface 1.
XSR(config)#interface dialer 1
XSR(config-if<D1>)#no shutdown
XSR(config-if<D1>)#dialer pool 22
XSR(config-if<D1>)#dialer string 2500
XSR(config-if<D1>)#encapsulation ppp
XSR(config-if<D1>)#ip address 10.10.10.1 255.255.255.0
XSR(config-if<D1>)#ppp pap sent-username toronto password ab
The following commands add a dialer pool, set Node C’s dialer number to
call, and map BRI interface 1/0 to Dialer interface 2:
XSR(config)#interface dialer 2
XSR(config-if<D2>)#no shutdown
XSR(config-if<D2>)#dialer pool 22
XSR(config-if<D2>)#dialer string 2501
XSR(config-if<D2>)#ip address 20.20.20.1 255.255.255.0
The following command configures backup Dialer interface 1 on Serial sub-
interface 2/0:0:
XSR(config)#interface serial 2/0:0
XSR(config-if<S2/0:0>)#no shutdown
XSR(config-if<S2/0:0>)#backup interface dialer1
XSR(config-if<S2/0:0>)#encapsulation ppp
XSR(config-if<S2/0:0>)#ip address 30.30.30.1 255.255.255.0
The following command configures backup Dialer interface 2 on Serial sub-
interface 2/0:1:
XSR(config)interface serial 2/0:1
XSR(config-if<S2/0:1>)#no shutdown
XSR(config-if<S2/0:1>)#backup interface dialer 2
XSR(config-if<S2/0:1>)#encapsulation ppp
XSR(config-if<S2/0:1>)#ip address 40.40.40.1 255.255.255.0
Node C (Called Node) Configuration
The following command configures a Node A user for authentication:
XSR(config)#username toronto privilege 0 password cleartext z