User`s guide

148 XSR User’s Guide
Implementing Dial Services Chapter 8
Configuring Dialer Services
XSR(config-if<D0>)#ip address 10.1.1.1 255.0.0.0
XSR(config-if<D0>)#encapsulation ppp
XSR(config-if<D0>)#dialer pool 6
XSR(config-if<D0>)#dialer string 4161234456 class toronto
XSR(config-if<D0>)#dialer string 9872312345 class andover
XSR(config-if<D0>)#no shutdown
Configure a map-class named Toro nt o with a 20-second wait for the dial tone:
XSR(config)#map class dialer toronto
XSR(config-map-class)#dialer wait-for-carrier-time 20
Configure a map-class named Andover with a 30-second wait for the daily
tone:
XSR(config)#map class dialer andover
XSR(config-map-class)#dialer wait-for-carrier-time 30
Configure a backup link for dial purposes with priority 200:
XSR(config)#interface serial 1/1
XSR(config-if<S1/1>)#dialer pool 6 priority 200
XSR(config-if<S1/1>)#no shutdown
Configure a backup link for dial purposes with priority 140:
XSR(config)#interface serial 1/2
XSR(config-if<S1/2>)#dialer pool 6 priority 140
XSR(config-if<S1/2>)#no shutdown
Configuring ISDN Callback
The following CLI commands configure point-to-point and point-to-
multipoint applications with single or multiple neighbors.
Point-to-Point with Matched Calling/Called Numbers
The following commands configure the called XSR with matched calling and
called phone numbers:
XSR(config)#interface dialer 1
XSR(config-if<D1>)#dialer pool 1
XSR(config-if<D1>)#dialer caller 921 callback
XSR(config-if<D1>)#dialer string 6032217921
XSR(config-if<D1>)#encapsulation ppp