User`s guide

XSR User’s Guide 129
Chapter 7 Displaying Statistics
Configuring Frame Relay
Map-Class Configuration
The Map Class configures a common profile (characteristics) that can be applied
to PVCs, eliminating the need to configure parameters on all individual PVCs.
The
map-class frame-relay command configures a Frame Relay map class.
Show Running Configuration
The show running-configuration command displays the running
configuration on the screen.
NOTE
Only those parameters different than default values are displayed.
Displaying Statistics
The following show commands display Frame Relay statistics:

show frame-relay lmi - displays global or interface LMI counters

show frame-relay map - displays DLCIs and remote nodes’ IP
addresses discovered by Inverse ARP.

show frame-relay traffic - displays Inverse ARP traffic statistics.

show frame-relay pvc - displays global or per interface, sub-
interface or DLCI data
Reports and Alarms
The Frame Relay-related alarms are described in Appendix A:
“Alarms/Events and System Limits” on page 355.
Clear Statistics
When it becomes necessary, you can strip the Inverse ARP Table and other
tables of Frame Relay statistics with the
clear frame-relay inarp and
clear frame-relay counter commands. The clear frame-relay inarp
command deletes particular or global Frame Relay port data and the
clear
frame-relay counter
command deletes specific or global DLCI or Frame
Relay port data.