User`s guide

118 XSR User’s Guide
Configuring BAP Chapter 6
Configuring PPP
XSR1(config-if<D1>)#encapsulation ppp
XSR1(config-if<D1>)#multilink load-threshold 3
XSR1(config-if<D1>)#ppp multilink bap
XSR1(config-if<D1>)#ppp bap number default 3200
XSR1(config-if<D1>)#ppp bap callback request
XSR1(config-if<D1>)#dialer-group 2
XSR1(config-if<D1>)#dialer map ip 10.10.10.2 1300
XSR1(config-if<D1>)#ip address 10.10.10.1 255.255.255.0
XSR1(config)#access-list 102 permit icmp any any 8
XSR1(config)#dialer-list 2 protocol ip list 102
XSR2 Configuration
XSR2(config)#controller e1 2/0
XSR2(config-controller<T1-2/0>)#pri-group
XSR2(config-controller<T1-2/0>)#no shutdown
XSR2(config-controller<T1-2/0>)#dial pool-member 1
XSR1(config)#interface Dialer1
XSR1(config-if<D1>)#no shutdown
XSR1(config-if<D1>)#dialer pool 1
XSR1(config-if<D1>)#encapsulation ppp
XSR1(config-if<D1>)#ppp multilink bap
XSR1(config-if<D1>)#ppp bap number default 1301
XSR1(config-if<D1>)#ppp bap number default 1300
XSR1(config-if<D1>)#ppp bap call request
XSR1(config-if<D1>)#dialer-group 2
XSR1(config-if<D1>)#dialer map ip 10.10.10.1 3200
XSR1(config-if<D1>)#ip address 10.10.10.2 255.255.255.0
!
XSR1(config)#access-list 102 permit icmp any any 8
XSR1(config)#dialer-list 2 protocol ip list 102
Further description of MLPPP and configuration of its various applications
on the XSR can be found in “Configuring Dialer Services” on page 135 and
“Configuring Integrated Services Digital Network (ISDN)” on page 187 in
this manual, and the XSR CLI Reference Guide.