Specifications
Cable, CompactFlash and Accessory Specifications
A-6
Ethernet Ports
The XSR comes equipped with two Ethernet (LAN) 10/100Base-T ports that support full-duplex
10 or 100 Mbps transmission. Both ports conform to IEEE 802.3 standards with 8-pin modular RJ-
45 connectors. A cross-over cable is used to connect the XSR directly to a PC or uplink port while a
straight-through cable is used to attach the router to a hub or switch.
Refer to Figure A-2for pinout assignments.
Figure A-2 Ethernet Port Pinouts
Pin Signal
1 Transmit +
2 Transmit -
3 Receive +
4 Not used
5 Not used
6 Receive -
7 Not used
8 Not used
Ethernet 1 & 2
Pin 8
Pin 1