Specifications

A-1
A
Specifications
System Specifications
This appendix details XSR data about hardware functionality including:
• Processor, system memory, chassis, power supply, interfaces
• Required cabling, CompactFlash and other accessories
• Pinout assignments for WAN and LAN interfaces
•LED behavior
Refer to tables throughout this appendix for specific information.
Table A-1 XSR Hardware Specifications
Category Parameters
Processor Type IBM PowerPC© 405GP
Core Operating Speed 440 MIPS @ 266 Mhz (Dhrystone 2.1 MIPS)
VPN
accelerator
Type SafeNet 1140 (30 Mbps) for 3DES encryption, Message Digest
(MD-5, SHA-1), and public key acceleration.
System
Memory
RAM 100-pin SDRAM DIMM connector for 64 Mbytes (default) of 100
MHz memory modules
Non-Volatile 8 Mbytes of Onboard Flash
Up to 1 Gbyte optional plug-in CompactFlash card. Type I and II
CF cards supported
Chassis Form Factor Rack-mountable
Dimensions 19” 1.5U (2.5” high by 14” wide by 10.625” deep)
Cooling Two fans 50 Watts (maximum) of heat dissipation
Environment Operating
Temperature
5 - 40° C
Storage Temperature -20 - 85° C
Relative Humidity 5% - 95%, non-condensing
Power
Consumption
Typical values XSR-1805 motherboard: 18 Watts
Serial NIM card: 4 Watts
T1/E1/ISDN-PRI NIM card: 3 Watts
ISDN BRI-S/T NIM card: 1 Watt