Specifications

Bootrom Monitor Mode Commands
3-38 Software Configuration
Updating bootrom with file, "cflash:bootrom1_18.fls".
Proceed with erasing current Bootrom in flash and replace with
cflash:bootrom2_02.fls? y
*****************************************************
* Do not interrupt or power down until complete! *
*****************************************************
Erasing 8 sectors at address=0xfff00000
Programming 130816(0x1ff00) bytes at address 0xfff00100
Programming 131072(0x20000) bytes at address 0xfff20000
Programming 131072(0x20000) bytes at address 0xfff40000
Programming 131072(0x20000) bytes at address 0xfff60000
Programming 131072(0x20000) bytes at address 0xfff80000
Programming 131072(0x20000) bytes at address 0xfffa0000
Programming 31320(0x7a58) bytes at address 0xfffc0000
Programming high branch instruction at address 0xfffffffc
Verifying Bootrom flash sectors
Locking 8 Bootrom flash sectors
***** Bootrom update completed. *****
Using default Bootrom password. The system is not secure!!!
Use “bp” to change password
XSR-1800:
bU
This command updates the bootrom through a network transfer to a local file. Be sure to enter the
U in uppercase. After you have updated this file, you can delete it from Flash to conserve space for
other files.
cd
This command changes the current directory in the file system to flash: or cflash:.
copy
This command copies a file using the syntax copy <source name> <destination name>. You
can copy files from flash: to cflash: and vice versa.
da
This command shows system date/time with the sample output below:
XSR-1800: da
Date: Saturday, 14-OCT-2002.
Time: 04:46:36