Specifications

Installing a CompactFlash Memory Card
2-10 Hardware Installation
Figure 2-14 Connecting Internal Power Supply Cord
You are now ready to configure the software and initialize the XSR. Continue with “Software
Configuration” on page 3-1.
Installing a CompactFlash Memory Card
An optional CompactFlash (CF) memory card provides additional non-volatile storage
capabilities in 8, 16, 32, or 64 Mbyte increments. The CF’s controller interfaces with a host system
allowing data to be written to and read from the CF’s flash memory module. The XSR-1805
supports Type I and II CompactFlash card types. Refer to Figure 2-17 for a generic illustration of
the card.
The CF’s memory is large enough to store image files. You can do so simply by using the Bootrom
Monitor mode
copy command. For example, to copy a file from the Onboard flash: directory to the
cflash: directory while in the flash: directory, enter:
XSR>copy <source_name> cflash:<destination_name>
Figure 2-15 Typical CompactFlash Card
DEFAULT
AC INLET/SWITCH
INPUT POWER
5V DC, 5.0A
12V DC, 1.5A
-12V DC, 0.5A
REFER TO MANUAL FOR POWER
EXTERNAL
POWER SOURCE
Pin 50
Pin 1