Specifications

Connecting XSR Cables
XSR Getting Started Guide 2-7
Connecting XSR Cables
Perform the following steps to connect your cabling:
1. Connect the serial Console cable provided in the packing box to your PC connector, as shown
in Figure 2-7.
Figure 2-7 Connecting Serial Console Cable
2. Connect your WAN cables to the T1/PRI or BRI port(s) to your WAN connectors, as shown in
Figure 2-8. Or, connect WAN cabling to your High Speed Serial connector, as shown in
Figure 2-9.
Figure 2-8 Attaching T1/PRI or BRI Port Connector
WER SUPPLY REQUIREMENTS
SN
ETH2
ETH1
COM
N
IM
1
N
IM
2
NIM
3