User`s guide

Aurorean Network Gateway-1100 User’s Guide 37
Chapter 3
Configuring the ANG-1100 with Aurorean Web Config
1 Click the Configuration Edit menu option.
The Configuration Edit window appears as shown in Figure 26.
Figure 26 Configuration Edit Window
2 Click on the configuration file of your choice.
3 The arguments of the configuration file you selected are displayed in
the Configuration File Edit window, as shown in Figure 27.
Aurorean Network Gateway
Configuration File Edit
This Web application allows you to update and delete the system configuration
files of the ANG-1100. These files are used to control the ANG-1100 for its VPN
functionality, Internet and LAN connectivity, firewall capabilities, networking
startup commands and other key features of the ANG-1100 device.
Extreme caution needs to be exercised when modifying the system
configuration files of the ANG-1100. The raw contents of the files are exposed
for updating and improper editing could render the ANG-1100 inoperable. Bear
this in mind as you use this Web application.
When the configuration files are modified, the ANG-1100/1105 device may need
to be rebooted in order for the changes to take effect. Other modifications to
configuration files can be made and their effects will be seen in the running
system. If you are not clear as to which type of change you are making, be sure
to click the “Reboot Now” button when prompted.
This list of files on the left displays the files contained in the ANG-1100 RAM-
based configuration file directory /etc/config.
Help
Configuration Files
config
inittab
ipfwrules
options
ripd.conf
start
zebra.conf
ipfwrule.routing
dhcpd.conf
config.ike
hosts
pppoe
winsd.conf
.netrc
snmpd.gms.conf
snmpd.conf
snmp.conft
resolv.conf
config.dat
hostinfo-eth1