User`s guide

Aurorean Network Gateway-1100 User’s Guide 21
Chapter 3
Configuring the ANG-1100 with Aurorean Web Config
Figure 15 Internet Setup Window
2 Do one of the following:
! Click the DHCP radio button and perform the following steps:
– Enter a Hostname for the system.
– Optionally, check the Use hostname with DHCP checkbox.
– Click Apply.
! Click the Manual assigned IP address radio button and perform
the following steps:
– Specify the ANG-1100’s IP address.
– Set the Subnet mask.
– Enter the Gateway IP address.
– Specify the Primary DNS IP address.
Aurorean Network Gateway
Help
VPN Status
VPN Setup
VPN
Connectivity Setup
Internet Setup
LAN Setup
Firewall Setup
ANG-1100 System
Set Password
Device Status
Firmware Update
Advanced Utilities
Links
Config File Editor
Aurorean Products
Enterasys Home
Internet Setup
Internet Address Assignment:
DHCP assigned IP address
Hostname:
Use Hostname with DHCP
Manual assigned IP address
IP Address:
Subnet:
Gateway:
Primary DNS:
Secondary DNS:
PPPoE assigned address
Username:
Password:
Confirm:
Apply