User`s guide

14 Aurorean Network Gateway-1100 User’s Guide
Chapter 3
Configuring the ANG-1100 with Aurorean Web Config
Setting Your Password
Because the default password is readily available through all ANG-1100
documentation, we strongly recommend that you ensure security by
configuring a new password to replace the default password netadmin.
NOTE
If you forget your password after changing it from the factory default,
you can return to using netadmin by pressing the Reset button and
reinstate all factory default values.
Change the Password by performing the following steps:
1 Click the Set Password menu option.
The Set Password window appears as shown in Figure 12.
Figure 12 Set Password Window
2 Type the old Password in the field provided.
3 Type a new Password in the field provided.
4 Confirm the new password in the field provided.
5 Click Apply.
Aurorean Network Gateway
Set Password
Help
VPN Status
VPN Setup
VPN
Connectivity Setup
Internet Setup
Old password:
New password:
Confirm:
Apply