User`s guide

Aurorean Network Gateway-1100 User’s Guide 9
Chapter 2 Connecting Power to the ANG-1102/1105
Installation
2 Plug the AC power cord into the power supply and the other end into
a grounded AC outlet or UPS as shown in Figure 9.
The Power LED on the ANG-1100 will light the moment you power
up the unit.
Figure 9 Connecting the Power Cable to the Power Supply
NOTE
International customers may swap the electrical cord segment shipped
with the ANG-1100 for a cord that meets the proper standard for their
country. A custom cord can be inserted in the power supply.
Power supply
AC power cord