Specifications

SPECTRUM Software Release Notice (SSRN)
For SPECTRUM 6.6 with Service Pack 2 CD release
Page 42
Document 5135
SPECTRUM Installation/Uninstallation Programs
BayStack Ethernet Hubs
Known Anomalies: SPECTRUM Installation/Uninstallation Programs
Item Description Solution
1 When you install SPECTRUM on Windows
NT/2000 with a user name containing a
space (for example, NT SPECTRUM) the
installation appears to run successfully
until the very end, then you receive a
message similar to the following:
sed: Unterminated ‘s’ command
You could possibly receive this message
several times.
Avoid spaces in SPECTRUM user names.
Management Module Information
MM Part Number Device(s) Firmware Version
SM-BAY1000 HubBaySt10x/20x/150/300/350 NA
Known Anomalies: BayStack Ethernet Hubs
Item Description Solution
1 The BSEnetRptr model takes several
minutes before its contact status is
established (the Repeater icon label
stays blue for several minutes before
turning green) when modeling by IP or
using Container-based AutoDiscovery.
There are no attributes being polled on
BSEnetRptr models. Because of this,
when modeling by IP or using Container-
based AutoDiscovery, it takes
approximately 3 minutes for the
Condition and Contact Status to become
Normal and Established, respectively.
This is because no SNMP requests are
made to the device during this time.
SNMP requests are made during IP-
based AutoDiscovery, so the Condition
and Contact Status are Normal and
Established immediately.