Specifications

SPECTRUM Software Release Notice (SSRN)
For SPECTRUM 6.6 with Service Pack 2 CD release
Page 17
Document 5135
• RFC2667 (IP Tunnel MIB): This RFC provides information pertaining to
tunnel protocols that are established over IP. It also provides the public
IPs that a tunnel is established over. SPECTRUM will use the
information provided on the tunnel such as remote and local IPs, type
of tunnel and security, and status of the tunnel.
In addition, several other enhancements were made to existing
management modules.
• Support was added to allow customers to monitor backplane utilization
on Cisco devices through a new Backplane Utilization view accessible
from a menu pick of the CATStackApp application model.
• The Management Module for Cisco Catalysts running IOS was enhanced
to allow this module to resolve all connections by expanding its ability
to get VLAN specific bridging information from the list of VLANs found in
the CISCO-VTP-MIB.
• Catalyst device labels were updated to represent the specific Device
Type that the user is modeling.
• VLAN interface models of Catalyst devices will now be in the sub-
interface view of the physical port(s) associated with those interfaces,
rather than being in the DevTop view of the device. In addition, a more
efficient model type is used to represent these VLAN interfaces.
• The Nortel Passport MM was enhanced to ensure SNMP requests are
properly received thereby enabling SPECTRUM to properly resolve the
devices connections completely.
• The Compaq Insight Manager Management Module has been enhanced
to support the Compaq Threshold MIB. All objects defined in this MIB
are available from the Host Compaq model type. Additionally, two new
views were added: Threshold Alarms Information and Threshold Agent
Information. The Threshold Alarms Information view provides insight
into Compaq’s threshold management, including Poll Frequency as well
as an Alarm Table containing extensive alarm detail. The Threshold
Agent Information view provides insight into agent polling settings,
major and minor MIB revision settings, and an Agent Table populated
with Name, Version Date, and Purpose.