User guide

Configuration for Wi-Fi Standard QoS

Setting up Radio Properties

Note: Choose Antenna for AP Model.

For the AP3620/3640, under AP Properties, select the installed antenna from the drop-down

menu for the Left, Middle, Right Antenna Type.

1 From the main menu, click Wireless AP Configuration. The Wireless AP Configuration screen is

displayed.

2 From the list of Wireless APs, select the Wireless 802.11n AP that is being used for the SpectraLink

VNS.

3 On the Wireless AP Configuration screen, select the tab for the radio that is being used for the

SpectraLink VNS. (Note that the screenshot has been scrolled down to reveal the Advanced

button.)

4 For Radio Mode, select the protocol to be used for the SpectraLink VNS.