User guide

VIEW Configuration Guide: Enterasys Networks

4 To save your changes, click Save.

For “Bridge Traffic Locally At HWC Topology” Mode

1 In the Core area, from the Mode drop-down menu, select Bridge Traffic Locally At HWC.

2 In the Layer 2 area, in the VLAN ID box, type the VLAN number.

3 From the Port drop-down menu, select the physical interface to egress traffic from.

4 If Layer 3 functions are desired, check the Layer 3: radio box.

a In the Layer 3 area, in the Interface IP box, type the network address.

b In the Mask box, type the appropriate values.

c From the DHCP Option drop-down menu, you can select either the Local DHCP Server or Use

DHCP Relay, depending upon your network topology. Click the Configure button. (More

details for DHCP options are available in Enterasys Wireless Convergence Software User Guide

Version 8.11.xx.)

Note: Define Multicast Filter for PTT Operation

In the Bridge Locally at HWC Topology, the SpectraLink Multicast Filter must be defined for proper

PTT operation.

5 On the Multicast Filters tab, check the radio buttons Multicast Support and Defined groups:.

6 Select the item SpectraLink Mcst(224.0.1.116) from the dropdown list of Defined groups:.

7 To save your changes, click Save.