User guide

Network Connection and Provisioning

Note: Change default password.

We recommend that you change the default password.

GUI Instructions

Enterasys Wireless Controller Management port interface

The management port on the Enterasys Wireless Controller may be labeled differently depending on the

Enterasys Wireless Controller.

Management port label on the Enterasys Wireless Controller

Enterasys Wireless Controller Management Port Label

C5110 Gb 1

C4110 Gb 1

C5210 (Gigabit Ethernet) port1

C20 Admin

C25 Management

V2110 eth0 (as defined by VM installation)

1 Statically assign an unused IP address in the 192.168.10.0/24 subnet for the Ethernet port of a PC.

Any IP address from 192.168.10.2 to 192.168.10.254 can be used.

2 Connect the Enterasys Wireless Controller’s management port to the PC with a cross-over RJ45

Ethernet cable, or connect the laptop and the controller into an isolated switch.

Note: Default Management Port Address

The default IP address of the Enterasys Wireless Controller’s management port is

192.168.10.1:5825.

3 Launch your Web browser.

4 In the address bar, type https://192.168.10.1:5825. The Enterasys Wireless Assistant login screen

is displayed.