User guide

VIEW Configuration Guide: Enterasys Networks
10
Accessing the Enterasys Wireless Controller for the First
Time
CLI Instructions
Enterasys Wireless Controller C20
1 Download the CP210x VCP driver that is specific to your Operating System (OS) from
www.silabs.com.
2 Connect your laptop to the Enterasys Wireless Controller C20 via USB A/B Device Cable.
1 Using a terminal program of choice, configure the following settings for the appropriate COM
device:
○ Speed – 115200
○ Databits – 8
○ Parity – None
○ Stop Bits – 1
○ Flow Control – None
Enterasys Wireless Controller, C25, C4110, C5110, C5210
1 Connect your laptop to the Enterasys Wireless Controller via Null Modem DB9 F-F (Female to
Female) cable.
2 Using a terminal program of choice, configure the following settings for the appropriate COM
device:
○ • Speed – 115200
○ • Databits – 8
○ • Parity – None
○ • Stop Bits – 1
○ • Flow Control – None
To access all Enterasys Wireless Controllers using a terminal program:
1 At the login: prompt, type admin.
2 At the Password: prompt, type abc123.
3 Press Enter. The Enterasys Wireless Convergence OS banner is displayed.