Specifications

9033820-03 VH-2402S2 User Interface 49
Egress Ports VLAN Configuration
Use this screen to modify the settings for an existing VLAN. You can add/
delete port members for a VLAN from any unit in the stack. (Note that all
ports can only belong to one untagged VLAN. This is set to VLAN 1 by
default, but can be changed via the Port Assignment VLAN Configuration
screen on page 48.)
Figure 2-36. Egress Ports VLAN Configuration
Vertical Horizon Stack Local Management
Egress Ports VLAN Configuration
Permanent Dynamic Permanent Dynamic
Unit Egress Ports Egress Ports Untagged Ports Untagged Ports
-----------------------------------------------------------------------------
1 1-27 1-27
2 ----------------- ----------------- ----------------- -----------------
3 ----------------- ----------------- ----------------- -----------------
4 ----------------- ----------------- ----------------- -----------------
5 ----------------- ----------------- ----------------- -----------------
6 ----------------- ----------------- ----------------- -----------------
7 ----------------- ----------------- ----------------- -----------------
Indexed by : VID
VLAN ID : 1 [Show]
VLAN Name : [More]
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
Permanent Egress
Ports
Enter the ports, or range of ports, to configured them as permanent
(static) members of the displayed VLAN.
Dynamic Egress
Ports
Shows the ports that have been added to the displayed VLAN group
via GVRP*.
Permanent
Untagged Ports
Enter the ports, or range of ports, to configured them as permanent
(static) untagged members of the displayed VLAN.
Dynamic Untagged
Ports
Shows the untagged ports that have been added to the displayed
VLAN group via GVRP*.
Indexed by Indicates if VLANs are displayed by ID or name.
VLAN ID The ID for the VLAN currently displayed. Range: 1-2048
VLAN Name A user-specified symbolic name for this VLAN.
String length: Up to 8 alphanumeric characters
[Show] Displays settings for the specified VLAN.
[More] Displays consecutively numbered VLANs.
* Not implemented in the current firmware release.