Specifications

9033820-03 VH-2402S2 User Interface 33
Port Security Configuration
Use the Port Security Configuration screen to enable and configure port
security for the switch. Port Security allows you to configure each port with
a list of MAC addresses of devices that are authorized to access the
network through that port.
Figure 2-23. Port Security Configuration
Vertical Horizon Stack Local Management
Port Security Configuration
MAC Address MAC Address
--------------------------------------------------
Secure address count : 0 Secure address count for port : 0
Unit : 1 Port : 1 MAC : 00-00-00-00-00-00
[Show] [More] [Add] [Delete]
Mode:DISABLE [Apply] [Clear]
<OK>
Use <TAB> or arrow keys to move. <Enter> to select
Parameter Description
MAC Address A list of the authorized MAC addresses that can access the
network through the specified port.
Secure address count The total number of authorized MAC addresses configured.
Secure address count
for port
The number of authorized MAC addresses configured for the
specified port.
Unit The stack unit ID.
Port The port number on the unit.
[Show] Displays authorized MAC addresses for the specified port.
[More] Displays more MAC addresses for the port.
Mode Port security can set to three states; Static, Disable, or
Learning. When set to Static, the switch will drop packets from
the port if the source MAC address does not match one of the
addresses in the MAC Address list. If set to Learning, the
switch will add the source MAC address of all packets received
on the port to the authorized MAC Address list.
[Apply] Applies a change of Mode to the port.
MAC A specific MAC address to be added or deleted from the list.
[Add] Adds a new MAC address to the current list.
[Delete] Removes a MAC address from the current list.
[Clear] Clears all the MAC addresses for the current port.