Specifications

26 VH-2402S2 User Interface VH-2402S2
Downloading System Software
Using TFTP Protocol to Download Over the Network
Use the TFTP Download menu to load software updates into the switch.
The download file should be a VH-2402S2 file from Enterasys Networks;
otherwise the agent will not accept it. The success of the download
operation depends on the accessibility of the TFTP server and the quality
of the network connection. After downloading the new software, the agent
will automatically restart itself. Parameters shown on this screen are
indicated in the following figure and table.
Figure 2-17. TFTP Download
Vertical Horizon Stack Local Management
TFTP Download Agent F/W
Download Server IP :
Agent Software Upgrade : ENABLED
Download Filename :
Download Mode : PERMANENT
[Process TFTP Download]
Download status : Complete
Backup Master Image Sync status : 0 %
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
Download Server IP IP address of a TFTP server.
Agent Software Upgrade Indicates that the switch is enabled for software upgrades.
Download Filename The binary file to download to the agent module.
Download Mode Indicates that the download is to permanent flash ROM.
[Process TFTP
Download]
Issues a request to the TFTP server to download the specified
file.
Download Status Indicates if a download is “Complete” or “In Progress.”
Backup Master Image
Sync status
Indicates the status of software synchronization with a backup
management agent. The software synchronization function
automatically copies new system software from the master to
the backup agent. In a stack with a backup management
agent installed, this process happens automatically after a
TFTP download has completed.