Specifications

24 VH-2402S2 User Interface VH-2402S2
Configuring IP Trap Managers
The following figure and table describe how to specify management
stations that will receive authentication failure messages or other trap
messages from the switch. Up to 5 trap managers may be entered.
Figure 2-15. IP Trap Managers
Vertical Horizon Stack Local Management
SNMP Configuration : IP Trap Managers
IP Address Community Name Status
1. 10.1.0.9 private ENABLED
2.
3.
4.
5.
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
IP Address IP address of the trap manager.
Community Name A community specified for trap management access.
Status Sets administrative status of selected entry to enabled or
disabled. Can also delete the selected entry.