Specifications

9033820-03 VH-2402S2 User Interface 19
IP Connectivity Test (Ping)
Use the IP Connectivity Test to see if another site on the Internet can be
reached. The screen shown below is described in the following table.
Figure 2-10. IP Connectivity Test
Vertical Horizon Stack Local Management
Network Configuration : IP Connectivity Test (Ping)
IP Address :
Test Times : 1 Interval : 3
Success : 0 Failure : 0
[Start]
<OK>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
IP Address IP address of the site you want to ping.
Test Times The number of ICMP echo requests to send to the specified site.
Range: 1~1000
Interval The interval (in seconds) between pinging the specified site.
Range: 1~10 seconds
Success/Failure The number of times the specified site has responded or not to
pinging.