Specifications

18 VH-2402S2 User Interface VH-2402S2
IP State USER-
CONFIG
Specifies whether IP functionality is enabled via
manual configuration, or set by Boot Protocol
(BOOTP). Options include:
USER-CONFIG - IP functionality is enabled
based on the default or user
specified IP Configuration.
BOOTP Get IP - IP is enabled but will not function
until a BOOTP reply has been
received. BOOTP requests will
be periodically broadcast by the
switch in an effort to learn its IP
address. (BOOTP values can
include the IP address, default
gateway, and subnet mask.)
Master IP Shows the IP address of the switch in the stack
operating as Master.
Backup IP Shows the IP address of the switch in the stack
operating as Backup Master.
Parameter Default Description