Specifications

Configuring Authentication
April 15, 2011 Page 24 of 36
Setting MultiAuth Authentication Traps
Traps canbeenabledatthesystemandmodulelevelswhenthemaximumnumberofusersforthe
systemandmodule,respectively,havebeenreached.Trapscanbeenabledattheportlevelfor
authenticationsuccess,failure,terminationandwhenthemaximumnum berofusershavebeen
reachedontheport
orallsupportedtraps.
Themodularswitchplatformssupportauthenticationtraps
Procedure 11describessettingtheMultiAuthauthenticationtraps.
Displaying MultiAuth Configuration Information
MultiAuthauthenticationsupportsthedisplayofsystem‐wideMultiAuthauthenticationvalues,
MultiAuthauthenticationcounters,portsettings,end‐userMACaddresses,sessioninformation,
idletimeoutsettings,sessiontimeoutsettings,andtrapsettings.
Table 3describesdisplayingofMultiAuthauthenticationsettingsandstatistics.
4. Reset the maximum amount of time a session
can last before termination to the default value
for the specified authentication method.
clear multiauth session-timeout
auth-method
Procedure 10 MultiAuth Authentication Timers Configuration (continued)
Step Task Command(s)
Procedure 11 MultiAuth Authentication Traps Configuration
Step Task Command(s)
1. Optionally enable MultiAuth authentication
system traps.
set multiauth trap system {enabled |
disabled}
2. Optionally enable MultiAuth authentication
module traps.
set multiauth trap module {enabled |
disabled}
3. Optionally enable MultiAuth authentication port
traps.
set multiauth trap port port-string {all |
success | failed | terminated |
max-reached}
4. Disable MultiAuth authentication traps for the
specified trap type.
clear multiauth trap trap-type {all | success
| failed | terminated | max-reached}
Table 3 MultiAuth Authentication Traps Configuration
Task Command(s)
Display system-wide MultiAuth authentication values. show multiauth
Display MultiAuth authentication counters. show multiauth counters
Display MultiAuth authentication port settings for all or the
specified ports.
show multiauth port [port-string]
Display end-user MAC addresses per port for all MAC
addresses and ports or for those specified.
show multiauth station [mac-address]
[port-string]
Display MultiAuth authentication sessions for all sessions
or the specified authentication method, MAC address, or
ports.
show multiauth session [agent
auth-method] [mac-address] [port-string]