User guide

Configuring WLAN Services
4-38 Configuring the Enterasys Wireless Standalone 802.11n AP
ToconfigureWPA‐AAAprivacy:
1. SelectoneorbothoftheWPAversioncheckboxes.IfWPAv2isselected,theKeyManagement
Optionsfielddisplays.
• (Optional)ChangetheKeyManagementOptions.
2. (Optional)ChangetheBroadcastRe‐KeyInterval(s).
3. ConfigureAuthenticationandAccounting:
•EntertheNASIdentifier.
•EntertheNASIPAddress.
4. ConfigureAuthentication:
•SelectthePrimaryRADIUSServer.
• (Optional)SelecttheSecondaryRADIUSServer.
5. (Optional)SelecttheVSAAttributes—APName,ServiceName,and/orSSID.
6. ClickSavetosaveyourchanges.
SSID Select to include the SSID of the AP in VSA attributes. Vendor
Specific Attributes (VSA) provide information on the identity of the
specific AP that is handling the wireless device, enabling the
provision of location-based services. The SSID of the AP is not
included in VSA attributes by default.
Function Buttons
Save Click to save your changes.
Delete Click to delete the WLAN service.
Undo Click to display the most recently saved values for the settings on
this screen.
Factory Defaults Click to display the factory defaults on this screen.The factory
defaults are not applied until you click Save.
Field Description